News

Classification of PVC pipes

23-02-22

PVC pipes are divided into PVC water supply pipes and drainage pipes, which are used for municipal water supply and drainage, industrial water supply and drainage, civil water supply and drainage, irrigation, vegetation watering, etc. There are three main connection methods for PVC pipes: sealing rubber ring, bonding and flange connection. Pipes with a diameter greater than or equal to 100 mm gene

READ MORE
PE pipe performance advantages

23-02-22

A good pipeline should not only have good economy, but also have a series of advantages such as stable and reliable interface, material impact resistance, crack resistance, aging resistance and corrosion resistance. Compared with traditional pipe materials, HDPE pipeline system has the following advantages: Series advantages: 1. Reliable connection: The polyethylene pipe system is connected by

READ MORE
What is the material of PE pipe

23-02-22

PE pipe is a thermoplastic resin obtained by polymerizing ethylene. Polyethylene is odorless, non-toxic, feels like wax, has excellent low temperature resistance, good chemical stability, can withstand the erosion of most acids and alkalis, is insoluble in common solvents at room temperature, has low water absorption, and has excellent electrical insulation properties. What is the material of P

READ MORE
Before using PE pipes, adequate preparations shoul

23-02-22

PE pipe fittings are widely used in the construction industry because of the good advantages of PE pipe fittings. However, before using PE pipe fittings, adequate preparations should be made to avoid any problems in the later stage. Before installing PE pipe fittings, trenches need to be dug, and the excavated soil must have a reasonable stacking place, and the trenches should not be too close,

READ MORE
What should be prepared before construction of PE

23-02-22

PE pipe fittings are widely used in the construction industry because of the good advantages of PE pipe fittings. However, before using PE pipe fittings, adequate preparations should be made to avoid any problems in the later stage. Before installing PE pipe fittings, trenches need to be dug, and the excavated soil must have a reasonable stacking place, and the trenches should not be too close,

READ MORE
The scope of application of PE floor heating pipe

23-02-22

PE floor heating pipe has the characteristics of general PE-RT pipe, such as flexibility and easy construction, low-temperature impact resistance, low-temperature impact resistance, relatively good thermal conductivity, good recyclability and environmental protection, and hot-melt connection. The following editor introduces its scope of application for you: 1. Ground heating system, which is su

READ MORE
How is the mpp power pipe connected?

23-02-22

MPP power pipes are widely used in our lives. In order to make them function better, the pipe fittings must be bonded correctly. Let's take a look together: 1. Before bonding mpp power pipes and pipe fittings, the socket side and the outside of the socket should be wiped with a dry cloth. When there is oil on the surface, it must be wiped clean with acetone. 2. The section of the pipe should

READ MORE
What factors affect the quality of mpp!

23-02-22

The mpp power pipe mainly uses modified polypropylene as the main raw material, which has the advantages of high temperature resistance and external pressure resistance. It is widely used in municipal engineering, tap water, heat pipes, power pipe engineering, etc. In order to be able to use better , let's take a look at the factors that affect the quality of the pipeline, and pay more attention t

READ MORE